bluesea.com BATTERY MANAGEMENT 52 Part # 9012 7765 7701 7703 7718 7719 7700 7702 7713 7717 Page # 39 40 43 Product Type Solenoid Switches Remote Battery Switches (RBS) Function Provides high-amp switching Provides high-amp switching with manual override Product L-Series Solenoid ML-Series Solenoid ML-Series RBS Manual Control –– –– Yes Nominal Voltage 12V/24V DC 12V DC 24V DC 12V DC 24V DC 12V DC 24V DC 12V DC 24V DC Operating Voltage (contacts) 0-800V 0-320V 0-64V 9-16V 18-32V 0-64V 9-16V 18-32V Control Voltage 9-36V 9-16V 18-32V 9-16V 18-32V 9-16V 18-32V 9-16V 18-32V Cranking Rating (30 sec.) 1,000A DC 600A DC 1,450A DC 1,450A DC Intermittent Rating (5 min.) 275A DC 225A DC 700A DC 700A DC Continuous Rating 250A DC 150A DC 500A DC 500A DC Operating Current - continuous @ 25°C nominal V DC 0.13A @ 12V DC 0.07A @ 24V DC 0mA < 13mA 0mA < 13mA Operating Current - when changing state 3.6A DC 3.8A DC < 7.0A DC < 4.0A DC < 7.0A DC < 4.0A DC < 7.0A DC < 4.0A DC < 7.0A DC < 4.0A DC Switching Cycles 1,000,000 200,000 100,000 100,000 Live Switching Cycles 40,000 @ 24V, 250A 1,500 @ 450V, 250A 1,000 @ 800V, 250A 80,000 @ 28V, 150A 10,000 @ 320V, 150A 10,000 @ 12V, 300A 10,000 @ 24V, 150A 2000 @ 48V, 100A 10,000 @ 12V, 300A 10,000 @ 24V, 150A 10,000 @ 12V, 300A 10,000 @ 24V, 150A 2000 @ 48V, 100A 10,000 @ 12V, 300A 10,000 @ 24V, 150A Control Signal Continuous Momentary Continuous Momentary Continuous Coil Function Normally Open Magnetic Latching Bi-Stable Magnetic Latching Auto-Releasing Magnetic Latching Bi-Stable Magnetic Latching Auto-Releasing Remote Control Switch Included –– 2145 SPDT (ON)-OFF-(ON) 2155 SPDT ON-ON 2145 SPDT (ON)-OFF-(ON) 2155 SPDT ON-ON Control Circuit Connection Tinned Wire Tinned Wire or Deutsch Connector Tinned Wire or Deutsch Connector Mounting Hardware #10 or M5 #10 or M5 #10 or M5 Terminal Stud Size M8 (accepts 5/16" terminals) 3/8"-16 (M10) 3/8"-16 (M10) Terminal Stud Length 5/8" (16 mm) 7/8" (22 mm) 7/8" (22 mm) Maximum Terminal Stud Torque 90 in-lb (10.0 Nm) 140 in-lb (15.5 Nm) 140 in-lb (15.5 Nm) Cable Size to Meet Ratings 1/0 AWG (50 mm²) 2 AWG (35 mm²) 4/0 AWG (120 mm²) × 2 4/0 AWG (120 mm²) × 2 Terminal Ring Diameter Clearance not rated 1.12" (28.4 mm) 1.12" (28.4 mm) Width 3.17" (80.5 mm) 3.18" (80.8 mm) 3.75" (95.2 mm) 3.75" (95.2 mm) Height 2.21" (56.1 mm) 2.29" (58.2 mm) 5.47" (138.9 mm) 5.47" (138.9 mm) Depth 2.86" (72.6 mm) 2.90" (73.7 mm) 2.03" (51.6 mm) 2.03" (51.6 mm) Ignition Protected ISO 8846 SAE J1171 ISO 8846 SAE J1171 ISO 8846, SAE J1171 ISO 8846, SAE J1171 Ingress Protected (see inside back cover) IP67 IP66 IP66 Solenoid and Remote Battery Switch Specification Table
RkJQdWJsaXNoZXIy MjgzMDI=