Blue Sea Systems 2021 Catalog

bluesea.com 45 BATTERY MANAGEMENT ML-Series Remote Battery Switches 500A magnetic latching switch provides high amperage switching under load, manually or from remote locations • Silver alloy contacts provide high reliability for switching live loads • LED output to remotely indicate switch state - requires optional LED (p. 155) or Remote Control Contura Switch with integrated LED (included in retail package) • 3/8"-16 tin-plated copper studs for maximum conductivity and corrosion resistance • One-piece stainless flange nuts ensure safe and secure connections • Label recesses for circuit identification • Retail package includes a Remote Control Contura Switch (p. 95) Part # Contact Voltage Control Voltage Signal Voltage Cable End 7700 0-64V 9-16V 12V Momentary Stripped Wire 7700100 0-64V 9-16V 12V Momentary Deutsch DTM 7702 0-64V 18-32V 24V Momentary Stripped Wire 7702100 0-64V 18-32V 24V Momentary Deutsch DTM 7713 9-16V 9-16V 12V Continuous Stripped Wire 7713100 9-16V 9-16V 12V Continuous Deutsch DTM 7717 18-32V 18-32V 24V Continuous Stripped Wire 7717100 18-32V 18-32V 24V Continuous Deutsch DTM 9160 Paralleling link bus Duetch DTM Cable End now offered for both retail and bulk units. Other connector plugs are available for high volume OEM applications. 7700 Remote Control Contura Switch included in retail package Paralleling Link Bus 9160 see table ML-Series ACR page 53 Remote Control Switch 360 Panels page 96 LEDs page 155 7713 Wire Size and Current Ratings 3.0" 76.20mm 5.47" 138.94mm 4.50" 114.30mm 3.75" 95.25mm 2.03" 51.56mm 1.90" 48.26mm 1.03" 26.16mm For the full list of specifications see page page 54 Wire Size Cranking 30 sec. Intermittent 5 min. Continuous (UL 1107) 2/0 AWG (70 mm²) 1,000A 400A 225A 4/0 AWG (120 mm²) 1,100A 400A 300A 2× 4/0 AWG (2x 120 mm²) 1,450A 700A 500A Related Products Stud Mount Insulators page 110 ML-Series Solenoid & RBS Update A number of ML-Series Solenoids and Remote Battery Switches are now rated to 64V DC, making them ideal for use in 36V DC and 48V DC nominally-rated systems. The new 64V DC rating applies only to the contact voltage, while maintaining the existing 12V DC or 24V DC signal voltage, making them ideal for use in multi-voltage systems like solar or golf-carts. The new higher voltage rating was tested to 2,000 live-switching cycles at maximum operating voltage per UL 1107 requirements. Terminal Stud Size 3/8"-16 (M10) Maximum Terminal Stud Torque 140 in-lb (15.8 N•m) Cable Size (to meet current ratings) 4/0 AWG (120mm²) Terminal Ring Diameter Clearance 1.12" (28.4 mm) Regulatory CE marked, meets ISO 8846 and SAE J1171 external ignition protection requirements IP66 - protected against powerful water jets (see inside back cover)

RkJQdWJsaXNoZXIy MjgzMDI=