2020 Blue Sea Systems Catalog

bluesea.com 35 BATTERY MANAGEMENT ML-Series Solenoid Switches 500A magnetic latching solenoid provides switching under load where manual control is not required Remote Control Contura Switch included in retail package Wire Size and Current Ratings PN Contact Voltage Control Voltage Signal Voltage Cable End 7701 0-64V 9-16V 12V Momentary Stripped Wire 7701100 0-64V 9-16V 12V Momentary Deutsch DTM 7703 0-64V 18-32V 24V Momentary Stripped Wire 7703100 0-64V 18-32V 24V Momentary Deutsch DTM Duetch DTM Cable End now offered for both retail and bulk units. Other connector plugs are available for high volume OEM applications. Paralleling Link Bus p. 39 (see table) Remote Control Contura Switches p. 89 • Silver alloy contacts provide high reliability for switching live loads • LED output to remotely indicate switch state - requires optional LED (p. 151) or Remote Control Contura Switch with integrated LED (included in retail package) • 3/8"-16 tin-plated copper studs for maximum conductivity and corrosion resistance • One-piece stainless flange nuts ensure safe and secure connections • Label recesses for circuit identification • Retail package includes Remote Control Contura Switch (p. 89) Regulatory CE marked, meets ISO 8846 and SAE J1171 external ignition protection requirements IP66 - protected against powerful water jets (see inside back cover) Related Products LEDs p. 151 Operating Temperature –55°C to +85°C Coil Circuit Connection 20 AWG Tinned Wire Voltage Nominal 12/24V DC Coil Function Normally Open Operating Current 3.6A (when changing state) 0.13A @ 12V, 0.07A @ 24V (continuous) Voltage Input 9V-36V DC Mounting Screws #10 or M5 Mounting Screw Torque 15-35 in-lb (1.7-4 Nm) Weight 0.9 lb (0.41 kg) Contact Rating: Continuous Rating 300A* Cranking Rating (30 sec.) 1,000A* Voltage Maximum 800V DC *2/0 Cable in 50° C ambient Regulatory CE marked for EC applications Ignition protected - ISO 8846 and SAE J1171 UL Certified - UL 508 Industrial Control Equipment IP67-protected against immersion up to 1 meter for 30 minutes (see inside back cover) L-Series Solenoid Switch 250A switch is remotely activated using a low amp switch and smaller gauge wire • Hermetically sealed contacts • Activated by a remote ON–OFF switch 8230 (p. 88) • Coil control circuit minimizes heating and amperage draw PN Description 9012 L-Series Solenoid Switch ON-OFF Switch 8230 p. 88 Related Product Wire Size Cranking 30 sec. Intermittent 5 min. Continuous (UL 1107) 2/0 AWG (70 mm²) 1,000A 400A 225A 4/0 AWG (120 mm²) 1,100A 400A 300A 2× 4/0 AWG (2x 120 mm²) 1,450A 700A 500A For the full list of specifications see page 48 For the dimensioned drawing see page 39 For the full list of specifications see page 48 Solenoid vs Remote Battery Switch Solenoid: An electronic switch with no manual control, for circuits where a manual battery disconnect is offered elsewhere in the circuit. Remote Battery Switch: A solenoid or relay with a manual control switch allowing for switching if control circuit is compromised and for service lockout. Wire Size Cranking 30 sec. Intermittent 5 min. Continuous (UL 1107) 1/0 AWG 900A 275A 250A 2/0 AWG (70 mm²) 1000A 400A 300A 2× 2/0 AWG (2× 70 mm²) 1,450A 600A 450A Wire Size and Current Ratings 7701 Stud Mount Insulators p. 104

RkJQdWJsaXNoZXIy MjgzMDI=